YOUR 1 STOP SHOP FOR QUALITY TOOLS AND SUPPLIES! (800)820-1765
Paint Gun Paint Gun ToolParadise.com - The Best Quality Tool Supplier in the United States - Now Open to the Public. SPECIAL Discounts on Tools, Electirc Tools, Air Tools, Paint Guns and More.

Previous IndexNext

PICTURETITLE PRICE 
 TOOL AID / Pt#: 36330
NOID LIGHTS/IAC TEST LIGHTS SPARK CHECKER KIT

TOOL AID / Pt#: 37500
ELECTRONIC FUEL INJECTOR PULSR
Diagnose fuel injector problems quickly and easily. Use in conjunction with a fuel pressure gage to perform an injector balance test. Operates individual fuel injectors to determine If injectors are clogged or faulty.
TOOL AID / Pt#: 37650
GM TBI PRESSURE TEST ADAPTER
This adapter is for use with Cat. Nos. 33770
TOOL AID / Pt#: 37660
GM 2.2L F.I. PRESS TEST ADAPTR
• Applies GM vehicles with to 2.5L and 5.7L
TOOL AID / Pt#: 37670
GM QUIK-CONNECT FI PRESS ADAPT
• Applies GM vehicles with to 2.5L and 5.7L
TOOL AID / Pt#: 38000
DELUXE FUEL INJECTION TEST KIT
A complete
TOOL AID / Pt#: 58000
MASTER FUEL INJECTION TEST KIT QUICK COUPLER; MFI/TBI/CIS

TOOL AID / Pt#: 58050
AEROSOL F.I. CLEANER ADAPTER USE W/58000 KIT; 7/16-28 T

TOOL AID / Pt#: 61800
STRUT ALIGNMENT LEVEL
Use this level to restore a vehicle's camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can be performed. More accurate than other methods. Also for repair of CV joints
TOOL AID / Pt#: 61900
TIE ROD END/BALL JOINT LIFTER
This labor saving tool quickly separates tie rod ends and ball joints from suspension components. Eliminates broken grease reservoirs.
TOOL AID / Pt#: 62200
SNGLE ACTION COIL SPRING CLAMP
Remove
TOOL AID / Pt#: 62900
MCPHERSON STRUT SPRING COMPRES
Every shop
TOOL AID / Pt#: 63100
ECONOMY MAC-STRUT SPRING COMPR
High quality at low cost! This is the best tool value
TOOL AID / Pt#: 66400
PEDAL DEPRESS/STR-WHEEL HOLDER

TOOL AID / Pt#: 81000
SLUGGER BODYMAN'S SLIDE HAMMER WITH ORGANIZER BOARD
10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue.
• Special hand-fit weight for ease of work.
• The most complete set available! 10 of the latest and most modern engineered body pulling and pushing attachments. Consists of 16 different parts.
• Dual hammer action for reverse or direct reconstruction blows.
• Quick assembly for applied hook-ups on fender edges, bumper ends, rocker panels, aligning doors and door edges, hoods and hood hinges, trunk and trunk hinges, headlights and many more applications.
• Rubberized hand-hold for good grip and safety.
• All parts easily stored on permanent board.
• Supplied with exclusive lock nut to keep attachments from rotating.
TOOL AID / Pt#: 81100
SLUGGER-IN-TOOLBOX PULLER SET BODYMAN'S SLIDE HAMMER KIT
• 10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue.
• Special hand-fit weight for ease of work.
• The most complete set available! 10 of the latest and most modern engineered body pulling and pushing attachments. Consists of 16 different parts.
• Dual hammer action for reverse or direct reconstruction blows.
• Quick assembly for applied hook-ups on fender edges, bumper ends, rocker panels, aligning doors and door edges, hoods and hood hinges, trunk and trunk hinges, headlights and many more applications.
• Rubberized hand-hold for good grip and safety.
• All parts easily stored on permanent board.
• Supplied with exclusive lock nut to keep attachments from rotating.

• Includes a handy metal tool box which can be locked for security.
TOOL AID / Pt#: 81200
SLIDE HAMMER PULLER KIT 5LB
Provides excellent balance with 5lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Heavy duty puller screw is extra long. Designed for that in-between job where the 10 lb. Slugger slide weight is too heavy and the pullers with 3 lb. weights are too light. Nose cone and shaft threads are 5/8"-18.
TOOL AID / Pt#: 81400
DENT PULLER & SLIDE HAMMER KIT
The largest selling and most economical body shop dent puller in the industry. 3lb. slide weight is mounted on 12" plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicnian's hands and provides 100% grip. Broached hex in nose cone locks pulling screw in place...ends breakage. Supplied with two hardened pulling screws and "L" puller hook fabricated of aircraft quality steel. Nose cone and shaft threads are 1/2"-20.
TOOL AID / Pt#: 87460
WINDSHIELD REMOVAL TOOL KIT REMOVES ACUTELY ANGLED GLA
This kit contains the basic tools and wire needed for removing even the most modern windsheilds. Makes a difficult job easy - even on acutely angled windshields.
TOOL AID / Pt#: 87675
DOOR SPRING TOOL *GM CARS
Use to remove and install the door hinge springs found on late model General Motors vehicles.
TOOL AID / Pt#: 87690
DOOR SPRING TOOL *GM LT-TRUCKS
Use to remove and install the door hinge springs found on late model General Motors vehicles. Makes a hard job easy.
TOOL AID / Pt#: 87810
UNIV UPHOLSTERY CLIP REMOVER
• Does not mar panel surface and eliminates broken fasteners when removing both
TOOL AID / Pt#: 87900
WINDSHIELD REMOVING TOOL
Use to remove windshields
TOOL AID / Pt#: 87965
EXTRA-LONG STICKER SCRAPER
Specially designed to access steep
TOOL AID / Pt#: 88050
TOE DOLLY
This large drop-forged steel model remains popular with body technicians. It has flat and low crown areas and is used in dinging flat surfaces and lower portions of hood. Good for close work.
TOOL AID / Pt#: 88175
SPOON DOLLY
The most popular body repair specialty tool. Combines all the contours and weight of a dolly with the reach and maneuverability of a spoon. Use for forming, prying and caulking in those hard to reach places.
TOOL AID / Pt#: 89000
PICK & FINISHING HAMMER
Most popular body shop hammer. Designed to provide excellent balance for close-in work and finishing. Flat, round face, 1-1/4" diameter. Pencil point on 5-1/4" drop-forged steel body.
TOOL AID / Pt#: 89200
CHISEL & FINISHING HAMMER
This drop-forged steel hammer is a must for straight finishing and grooving jobs. Work on narrow fender beads with wedge shaped chisel cross peen. Round head has flat surface 1-3/8" diameter. 5-1/2" overall length.
TOOL AID / Pt#: 89800
5 INCH SANDING BLOCK
Uses standard 3" x 8" sandpaper. Easy to affix paper to steel spikes molded into block. Holds paper securely. Use with wet or dry sandpaper on flat or curved surface.
TOOL AID / Pt#: 94400
QUICK CHANGE CHISEL RETAINER
Securely holds .401" shank chisels. Fits most popular air hammers. Safe to use, fast to change chisels. Just pull back collar to install or remove chisels. Retainer becomes part of tool eliminating need for other retainers.
TOOL AID / Pt#: 98025
BRASS AIR REGULATOR
Control air pressure as needed. Designed with four position on-off detent stops. Openings: 1/4" NPT Male x 1/4" NPT Female. Not a shut-off valve. Brass construction resists oxidation.
TOOL AID / Pt#: 98500
THE OILER AUTO AIR TOOL OILER
Standard Model. High quality aircraft aluminum stem, precisely machined to 1/4" NPT. Oil reservoir is fabricated of high impact plastic. Technician always sees oil supply and oiling action. Holds three to four days supply of oil. With each use of the air tool, a fine mist of precisely metered oil enters the air stream. All internal moving parts are coated and lubricated. Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers. 1/4" NPT Female inlet x 1/4" NPT Male outlet.
TOOL AID / Pt#: 99190
INLINE BLOW-GUN W/RUBBER TIP
No need to keep on disconnecting an air tool to hook up a blow gun. Never gets lost or misplaced. Small, compact and easy to use. Fits permanently between air hose and coupler. Precision machined from aircraft aluminum. Air stream nozzle has a natural angle for easy use. Lightweight and durable. Available with OSHA or rubber nozzle. 1/4" NPT Female x 1/4" NPT Female.
THEXTON / Pt#: 106
0THYLENE GLYCOL COOLANT TESTER ANTIFREEZE
• Disc-Type anit-freeze tester
• Large professional sized tester (16-1/4" long) is accurate at all temperatures. Tests coolant hot or cold. Easy to read discs are magnified by convex designe of the clear SAN plastic barrel. Celsius and Fahrenheit scales.
• Special feature is the "6th Disc" which shows over protection and a loss of cooling efficiency. Beyond 70% anti-freeze, cooling & corrosion effectiveness is reduced. One-piece bulb and neoprene dip tube.
THEXTON / Pt#: 107
PROPYLENE GLYCOL COOLANT TESTR

• Disc-Type anit-freeze tester
• Large professional sized tester (16-1/4" long) is accurate at all temperatures. Tests coolant hot or cold. Easy to read discs are magnified by convex designe of the clear SAN plastic barrel. Celsius and Fahrenheit scales.
• Special feature is the "6th Disc" which shows over protection and a loss of cooling efficiency. Beyond 70% anti-freeze, cooling & corrosion effectiveness is reduced. One-piece bulb and neoprene dip tube.
THEXTON / Pt#: 117
CHARG-CHEK BATTERY TESTER FLOATING DISC-TYPE; 16IN L

• Professional disc-type; accurate down to -40 degrees Farenheit
• Full size specific gravity tester is accurate and easy to use. Number of floating discs show state of battery charge. Specific gravity levels are printed on the tough, see-through plastic body. Has one-piece rubber bulb, neoprene tip.

THEXTON / Pt#: 121
WIREHAWK CIRCUIT TESTER
ways: Captures and pierces wire with unique hook design or can be used as ice-pick type tester. If circuit is live, bulb in handle lights up. Has 16 gauge, 44 inch ground wire with 50 amp alligator ground clamp. Use for circuits, connections, fuses and 2-cycle engine timing.
THEXTON / Pt#: 137
POWER-ON CIRCUIT TESTER 12/24V

Tests function and operation of electrical motors, solenoids, relays, lights and more by supplying power or ground. For use on 12V and 24V systems. High impedance tester is safe (in test mode) for computer circuits. LEDs provide visual indication of continuity. Red or green LED shows polarity at probe.
THEXTON / Pt#: 201
FAST-SPEC ELECTRONIC DATABASE VEHICLE SPECS 1987-CURRENT
Thexton's FAST-SPEC™ electronic database goes wherever it's needed, under the hood or under the car, to instantly access vehicle specs from 1987 to current models. Once technicians and mechanics try it, the love it! Weighs less than a pound and contains over 50,000 screens of vehicle specs. Features protective boot of high visibility vinyl.

Covers these specifications and more:
• Battery • Starter • Ignition Systems • Spark Plugs • Belt Tension • Engine Torque Specs • Alternator/Regulator • Engine Computer System • Fuel System • Brake Service • Steering • Suspension • Tires • Wheel Alignment • Wheel Nut Torque • Capacities for: Air Conditioning/Cooling System/Crankcase/Differential/Final Drive/Transmission/ and Service Intervals
THEXTON / Pt#: 206
CHIP ONLY FASTSPEC LABOR GUIDE UPGRADE FOR MODEL 201

• The Labor Guide Memory Chip enhancement plugs into the expasion slot on your Thexton Model 201 Vehicle Spec Information System.
• Gives user a choice between specifications and flat rate times
Note: To switch between Fast-Spec and Labor Guide programs requires the 1999 or newer vehicle specification software upgrade (indicated by screen showing model year 1999 or later).
Note: Vehicle specification and Labor Guide software updates are available through Thexton.
THEXTON / Pt#: 350
GM CARBURETOR ADJUSTING TOOL
For all 1979 and up GM vehicles with carburetors
• Fits idle/ mixture screws
• Flexible shaft tool makes reaching and adjusting idle/mixture screws easy. One end fits "Double-D" screws and the other fits 4.5mm hex heads. Two tools in one. Sliding handle slips securely over either end of tool.
THEXTON / Pt#: 361
FUEL INLET WRENCH
Fits 1" GM fuel inlet nuts
• Specifically designed wrench is angled to allow use of two wrenches side-by-side. Fits all 1" GM fuel inlet nuts. Twelve-point open jaw slips over fuel lines up to 3/8". Hardened steel with vinyl grip.
THEXTON / Pt#: 404
IGNITION SPARK TESTER ADJUSTABLE SPARK GAP
• Works on ignition systems from high energy electronic to small engines. Tests for no start conditions and for spark strength. Adjustable gap allows for spark gap requirements from 0 to 40,000 volts. Gauge background makes spark easier to see for accurate measurement. Alligator clip securely fastens to ground. Screw assembly adjusts spark gap quickly and easily. Now includes safety shield.
THEXTON / Pt#: 415
FORD DISTRIBUTOR SHAFT TOOL REMOVER AND INSTALLER
Works on all Ford vehicles with TFI-IV ignition systems, 1983 and up. Removes and re-installs distributor gear so Hall Effect Switch may be serviced. Steel tool won't stress gear teeth or damage gear and shaft.
THEXTON / Pt#: 418
RIGHT ANGLE GREASE GUN ADAPTER
Fits grease fittings in confined areas, such as lower ball joints on Chrysler K-cars. Specially designed seal and slot in coupler housing provides 90 degreee access into areas with minimal clearance. Fits all standard grease guns - can be used as general purpose grease coupler.
THEXTON / Pt#: 430
HOOD/TAILGATE PROP

Clamps to weak gas cylinder lifts to hold up hood or tailgate. Won't damage cylinder rod. Eliminates clumsy sticks or props.
THEXTON / Pt#: 467
RADIATOR/CONDENSER CLEAN WAND FLUSHES CONDENSER EXTERIOR
• Flushes condensor exterior to restore A/C efficiency.
• 24" wand is zinc plated steel with valve assembly to adjust desired flow rate. Two-foot length allows reaching between condensor and radiator to reverse flush dirt, bugs and debris that build up on front of condenser coils.
• An must have tool for A/C technicians because restricted air flow across condenser reduces efficiency, especially at low speeds.
• Work off a standard garden hose connection
THEXTON / Pt#: 485
RADIATOR PETCOCK SOCKETS 2PC 1/4DR

THEXTON / Pt#: 803
MASTER CYLINDER BLEEDER KIT UNIVERSAL SAE&MM FITTINGS

• Great for "bench" bleeding master cylinders - can be used on car as well!
• Professional kit includes long lasting aluminum adapters for US and metric fittings. US adapters: (2)3/8-24, (1)7/17-24, (1)9/16-20 and (2)1/2-20. Metric adapters: (4) M10x1.0, (2)M10x1.25, (1)M11x1.5, (2)M12x1.0, (1)M13x1.5. Plus check valves, hose, thread gauge, instructions and case.
TIF INSTRUMENTS / Pt#: 4580A
R134A A/C GAGE SET W/HOSES GLYCERINE FILLED GAGES
• Aluminum manifold block
• 2-Way
• 80mm glycerine filled gauges
• Includes temperature conversion scale for R134a
• 1/2" ACME fittings and field service couplings for automotive R134a applications
• 72" premium hoses, red, yellow, blue
PICTURETITLE PRICE 
 TIF INSTRUMENTS / Pt#: 555
LEAK DETECTOR SENSING TIPS 3PK FOR RX1/XP1/5750A (XP2)

• Package of 3 tips and 3 protectors

TIF INSTRUMENTS / Pt#: 5750A
R12/R134A REFRIG LEAK DETECTOR SAE-APPROVED
Full featured buy easy to use, the original TIf detector. The TIF5750A offers the detachable, flexible probe with micro-pump, leak intensity indicators and all the features you have come to know and trust. Includes the patented SCAN mode that revolutionized leak detection.
Features:
• LED Leak Size Indicators
• Two Sensitivity positions, including our unique ScanMode
• Reset Button for instant re-calibration
• Detachable probe
• High efficiency pump
• Certified to SAE J1627
• Detects ALL Halogenated Refrigerants
• SAE Classified for Intrinsic Safety
• Constant Power Indication
• Cordless and portable, operates on 2 C-cell batteries.
• 14" (35.5cm) flexible stainless probe
• Carrying case and spare sensing tip included
• One Year Warranty
TIF INSTRUMENTS / Pt#: 9010A
ELECTRONIC A/C CHARGING SCALE

A revised and updated version of the classic TIf Slimline scale, the new TIF9010A brings greater performance, reliability and usability to the trade. With the greatest resolution in the industry, ,and no compromise on capacity, this unit offers new features and specs that you won't want to do without.
Features:
• Touch Key controls
• Three display modes - Lbs./Oz; Decimal Lbs., Kilograms
• Very High Resolution - 0.1 oz / 0.005 Lbs. / 2 grams
• Extreme Accuracy
• 110 Pound / 50kg capacity
• Auto Zero
• Compact design, 2.5" (6.35 cm) thick
• Charging and recovery Capabilities
• Can be used with All Refrigerants
• Completely portable, battery powered
• Removable control box with prop stand/hanging hook
• Built into Carrying Case
• Two Year Warranty
Specifications:
Range: 0lbs 0.0oz to 110lbs 0.0oz., or 0.000lbs to 110.000lbs, or 0.000kg to 50.000 kg
Resolution: 0.1 oz / 0.005lbs. / 2 grams
Accuracy: +/- 0.5% of reading
TIF INSTRUMENTS / Pt#: 9075
PROGRAMMABLE A/C CHARGE SCALE R12/R134A
Looking for an easy, no hassle, automatic, and programmable multi-gas charging/recovery meter? Look no more, this Dual Solenoid Electronic Charging Meter allows you to quickly and efficiently charge non-compatible refrigerants (new and old refrigerants) without the chance of cross contamination. High resolution enables precise charging for optimum economy and system performance. A durable "Load Cell" mechanism is built into the unit to withstand rugged field use and ensure performance longevity. This meter is sure to meet both your present and future needs.
Features:
• Programmable: allows the user to preset amount for automatic charge/recovery.
• Hold and Power Alert features.
• UL Listed
• Keypad controls
• Accessory outlet
• Separate charging ports for non-compatible compounds (e.g. R12,R134a)
• One year warranty
Specifications:
• Range: 0 to 150 lbs. (0 to 68kg)
• Resolution: 0.5 oz (10 grams)
• Accuracy: +/- 2% of RDG or 1/2 oz whichever is greater.
TIF INSTRUMENTS / Pt#: 9600
R12 A/C GAGE SET 4WAY W/HOSES ALUMINUM MANIFOLD W/SITE G
• 80mm glycerine filled gauges
• 4-way
• Includes (4) UL-approved 72" hoses with anti-blowback fittings
• Aluminum block manifold construction
• Color coded knobs, brass fittings, hanging hook
• Optical sight glass for visual contact
• Includes conversion scales for R12, R22 and R502
TIF INSTRUMENTS / Pt#: RX1A
R12/R134A REFRIG LEAK DETECTOR LED DISPLAY
High and low sensitivity levels.
• Detects all halogenated refrigerants.
• Tri-color visual leak size indication.
TIF INSTRUMENTS / Pt#: XP1A
R12/R134A REFRIG LEAK DETECTOR LED & AUDIBLE INDICATORS
XP-1 Electronic Refrigerant Leak Detector
• Tri-color, six segment visual leak size indicator, displays 18 alarm levels
• Seven levels of sensitivity adjustment provide an increase of up to 64x
• Battery test function with true voltage indication
• Mute feature silences the audible alarm
• True mechanical pump provides positive airflow through sensing tip
• One touch reset
• Tactile keypad
• Three year manufacturer warranty
TIF INSTRUMENTS / Pt#: ZX1
REFRIGERANT LEAK DETECTOR HEATED PENTODE; RECHARGEAB
Patent Pending Heated Pentode™ sensor technology
• Refrigerant specific detection
• Detects all halogenated refrigerants at levels below 0.1 oz./yr.
• Tri-color visual leak size indication
• Tactile keypad controls with one touch reset and adjustable sensitivity
• True mechanical pump provides instant response and clearing
• Sensor failure indication
• Carrying case and recharger included