YOUR 1 STOP SHOP FOR QUALITY TOOLS AND SUPPLIES! (800)820-1765
Paint Gun Paint Gun ToolParadise.com - The Best Quality Tool Supplier in the United States - Now Open to the Public. SPECIAL Discounts on Tools, Electirc Tools, Air Tools, Paint Guns and More.

Previous IndexNext

PICTURETITLE PRICE 
 OTC DIVISION OF SPX CORP / Pt#: 6489
FORD CAM 22PC MASTER TOOL KIT SERVICE 1992-2002 VEHICLES

OTC DIVISION OF SPX CORP / Pt#: 6490
HUB TAMER MASTER TOOL SET REMOVE/INSTALL HUB/BEARING
• Cuts 50% off the normal service time to replace front wheel bearings! You do not need to remove knuckle assembly
OTC DIVISION OF SPX CORP / Pt#: 6494
STRUT SPRING COMPRESSOR CLAMSHELL-TYPE

OTC DIVISION OF SPX CORP / Pt#: 6495
HARMONIC BALANCER HOLDING TOOL 3-PIN DESIGN

OTC DIVISION OF SPX CORP / Pt#: 6496
PITMAN ARM PULLER

OTC DIVISION OF SPX CORP / Pt#: 6507
FUEL/OIL LINE DISCONNECT TOOLS 4PC ANODIZED ALUMINUM

OTC DIVISION OF SPX CORP / Pt#: 6508
MASTER DISCONNECT TOOL SET

OTC DIVISION OF SPX CORP / Pt#: 6509
FUEL LINE DISCONNECT TOOL 5/16 AND 3/8

OTC DIVISION OF SPX CORP / Pt#: 6511
FUEL LINE DISCONNECT TOOL 3/8 AND 1/2

OTC DIVISION OF SPX CORP / Pt#: 6517
QUICK DISCONNECT TOOL SET 9PC A/C-FUEL-TRANSMISSION-COOL

OTC DIVISION OF SPX CORP / Pt#: 6525
LEAK MASTER EVAP SYSTEM TESTER

OTC DIVISION OF SPX CORP / Pt#: 6535
BALL JOINT SEPARATOR FORK

OTC DIVISION OF SPX CORP / Pt#: 6536
FORD HUBTAMER ADAPTER TAURUS/SABLE CONTOUR/MYSTI

OTC DIVISION OF SPX CORP / Pt#: 6538
A/C LINE QUICK DISCONNECT TOOL 4PC SET; FORD/CHRYSLER/JEE

OTC DIVISION OF SPX CORP / Pt#: 6612
TOYOTA FW-BEAR ADJ NUT SKT 55M
55mm hex socket services Toyota FJ
OTC DIVISION OF SPX CORP / Pt#: 6795
FORD FW-BEAR LOCKNUT SKT 2.5
Special rounded 2-1/2 hex socket services 1995-96 Ford F-150 truck and full-size Bronco with automatic locking hubs. 1/2 sq. drive.
OTC DIVISION OF SPX CORP / Pt#: 6796
FORD FW BEARING LOCKNUT SOCKET
Special rounded 2-3/4 hex socket services 3/4- and 1-ton Ford F-250 and F-350 trucks with automatic locking hubs. 1/2 sq. drive.
OTC DIVISION OF SPX CORP / Pt#: 6902
FW BEARING LOCKNUT SKT 2-3/8
2-3/8 hex socket services 1984-92 Ford Ranger and Bronco II with automatic locking
OTC DIVISION OF SPX CORP / Pt#: 6921
FW BEARING L.NUT SOCKET 2-1/2
This 2-1/2 socket fits hex nuts found on rear axles and various front axle applications on light-duty trucks. 1/2 square drive.
OTC DIVISION OF SPX CORP / Pt#: 6928
FW BEARING L.NUT SOCKET 2-9/16
Special rounded hex socket (2-9/16) services 1990-1993 Dodge trucks with Dana 60 manual hubs. 1/2 sq. drive.
OTC DIVISION OF SPX CORP / Pt#: 6936
FW BEARING L.NUT SOCKET 2-3/8
Special rounded hex socket (2-3/8) services 1990 & newer Ford Ranger
OTC DIVISION OF SPX CORP / Pt#: 6986
STUD REMOVER SOCKETS 1/4-7/16 4PC SAE

OTC DIVISION OF SPX CORP / Pt#: 6987
STUD REMOVER SOCKETS 6MM-12MM 4PC METRIC

OTC DIVISION OF SPX CORP / Pt#: 7000
FUEL INJECTOR CLEANER 12/16OZ
•Use right from the can - no mixing.
OTC DIVISION OF SPX CORP / Pt#: 7005
PWR STEER PUMP PULLEY INSTALLR
An ideal companion to the 7185 the 7005 is a real timesaver when it comes to installing power steering pump pulleys and GM press-on water pump pulleys. Wont damage internal components by exerting force through the pump shaft.
OTC DIVISION OF SPX CORP / Pt#: 7023
UNIV. TIE ROD ADJUSTING TOOL
Permits 360 degree rotation of sleeve for required adjustment. Four-position feature lets you locate tool to grip sleeve properly
OTC DIVISION OF SPX CORP / Pt#: 7028
SPICER CLUTCH ADJUSTER
• For Spicer®-built Heavy-Duty Clutches
OTC DIVISION OF SPX CORP / Pt#: 7034
DISC BRAKE PAD SPREADER
No longer must disc brake pad installation be difficult. The No. 7034 fits between the two new pads being installed
OTC DIVISION OF SPX CORP / Pt#: 7068
UPPER ARM BUSHING SERVICE SET
Includes all adapters needed for quick bushing removal/installation without removing control arm from vehicle. Now you can easily replace press-in type upper control arm bushings on most rear wheel drive Ford GM and Chrysler vehicles.
OTC DIVISION OF SPX CORP / Pt#: 7077
AXLE STUD CONE PLIERS
Now you can easily remove the tapered cone from the studs used on medium- and heavy-duty truck rear axles.
OTC DIVISION OF SPX CORP / Pt#: 7080
BALL JOINT SPANNER WRENCH
Designed for removal and installation of ball joint adjusting sleeves on 1/2-
OTC DIVISION OF SPX CORP / Pt#: 7085
DUST BOOT CLAMP INSTALLER
Works on all vehicles with band-type boot clamps.
OTC DIVISION OF SPX CORP / Pt#: 7090A
FR WHL BEARING LK NUT WR
Applications: 1973-1981 GM 3/4 and 1 ton 4WD trucks.
OTC DIVISION OF SPX CORP / Pt#: 7095
TIE ROD ADJ. TOOL-COMPACT CARS
Unique design permits 360 degree rotation of the adjusting sleeve even where space is limited. 1/2in. square drive allows use of ratchet or breaker bar.
OTC DIVISION OF SPX CORP / Pt#: 7096
TIE ROD ADJ.TOOL-FULL SIZE CAR
Unique design permits 360 dUegree rotation of the adjusting sleeve
OTC DIVISION OF SPX CORP / Pt#: 7097
TIE ROD ADJ. TOOL LGHT TRUCKS
Unique design permits 360 degree rotation of the adjusting sleeve
OTC DIVISION OF SPX CORP / Pt#: 7135A
FWD FRONT HUB INSTALLER

OTC DIVISION OF SPX CORP / Pt#: 7148
PROPANE ENRICHMENT KIT
The No. 7148 ensures proper idle mixture and compliance with emission standards.
OTC DIVISION OF SPX CORP / Pt#: 7157
FW BEARING LOCK NUT SOCKET 4WD CHEVY/GMC; FORD F100/F
Applications:
OTC DIVISION OF SPX CORP / Pt#: 7158
FW BEARING LOCKNUT SOCKET GM 3/4-1TON TRUCK; FORD F-
Applications:
OTC DIVISION OF SPX CORP / Pt#: 7168
JIMMY PRY BAR 30INCH
• Forged from chrome alloy steel and heat-treated to resist bending and breaking
OTC DIVISION OF SPX CORP / Pt#: 7185
PWR STEER PUMP/ALT PULLY REMVR
The 7185 tool removes pulleys on most Chryser Ford GM and VW vehicles including Saginaw Thompson and the Ford C2 power steering pumps; GM belt-driven vacuum pumps on both gas and diesel cars; and press-on water pump pulleys on GM 4-cylinder and V6 engines.
OTC DIVISION OF SPX CORP / Pt#: 7189
OXYGEN SENSOR WRENCH
Needed for servicing today's computer-controlled vehicle systems.
OTC DIVISION OF SPX CORP / Pt#: 7208A
FRONT WHEEL DRIVE HUB REMOVER

OTC DIVISION OF SPX CORP / Pt#: 7215
EXHAUST BACK PRESSURE TESTER READS THRU OXYGEN SENSOR P
Now there's a fast
OTC DIVISION OF SPX CORP / Pt#: 7230
HEI IGNITION TESTER
A quick way to check no-start cars for ignition problems. Simply unplug the plug wire
OTC DIVISION OF SPX CORP / Pt#: 7238
A/C LINE QUIK DISCONNECT TOOLS
These tools provide the only means of separating spring lock air conditioning refrigerant pressure lines on 1981-current Ford vehicles and 1994 and newer Chrysler and Jeep vehicles.
OTC DIVISION OF SPX CORP / Pt#: 7244
TRANS/PWR-STEER LINE DISCONECT
• Same as Ford T82l-9500 and Kent-Moore J-36391
OTC DIVISION OF SPX CORP / Pt#: 7245
STEERING WHEEL PULLER
Removes steering wheels on most domestic and imported vehicles
OTC DIVISION OF SPX CORP / Pt#: 7249
BALL JOINT PRESS KIT
This set removes and replaces ball joints. The C-frame press alone can also be used to remove and replace universal joints.
PICTURETITLE PRICE 
 OTC DIVISION OF SPX CORP / Pt#: 7269
WHEEL BEARING LOCKNUT WRENCH
• For use with 1985-newer Ford F-series 3/4 and 1 ton truck with Dana 80 Rear axle
OTC DIVISION OF SPX CORP / Pt#: 7270A
WHEEL BEARING LOCKNUT WRENCH
1984-1992 Ford Ranger & Bronco II with manual hubs
OTC DIVISION OF SPX CORP / Pt#: 7272
FORD EFI ADAPTR
EFI Quick Coupler Disconnect fitting (Ford) (.307-32 female)
OTC DIVISION OF SPX CORP / Pt#: 7299
BRAKE CALIPER PIN REMOVER
The damage-free way to remove brake caliper pins on 1986-88 Aerostars
OTC DIVISION OF SPX CORP / Pt#: 7310A
ADJUSTABLE PITMAN ARM PULLER FOR MEDIUM & HEAVY DUTY TR

OTC DIVISION OF SPX CORP / Pt#: 7311A
ADJUSTABLE PITMAN ARM PULLER FOR CARS AND LIGHT TRUCKS

OTC DIVISION OF SPX CORP / Pt#: 7314A
PITMAN ARM PULLER

OTC DIVISION OF SPX CORP / Pt#: 7315A
TIE ROD END/PITMAN ARM REMOVER

OTC DIVISION OF SPX CORP / Pt#: 7317A
DISC BRAKE CALIPER TOOL KIT

OTC DIVISION OF SPX CORP / Pt#: 7337
FORD FUEL LINE DISCONNECT SET
These unique tools are used to easily diconnect the spring coupling of the fuel lines on Ford's popular throttle body and port fuel injection systems found on most of their cars and light trucks from 1986-current. These tools are spring loaded and durable.
OTC DIVISION OF SPX CORP / Pt#: 7361
FUEL LINE DISCONNECT TOOL SET

OTC DIVISION OF SPX CORP / Pt#: 7363
FUEL LINE DISCONNECT KIT
This set works on quick connect fuel lines on Ford
OTC DIVISION OF SPX CORP / Pt#: 7394
UNIVERSAL HUB PULLER W/3-LEGS
Has readily adjustable sliding arms to pull wheel hubs quickly and easily.
OTC DIVISION OF SPX CORP / Pt#: 7402
UNIVERSL OUTSIDE THREAD CHASER CAPACITY 1.25-5IN O.D.
Precision dies restore threads to their original condition to make reassembly of matching parts faster and easier. Eliminates the need for expensive thread-cutting equipment. Tighten the tool slightly on the good threads
OTC DIVISION OF SPX CORP / Pt#: 7403
STEERING WHEEL PULLEY PULLER FLY WHEEL PULLER
Pulls steering wheel on most makes of late model cars. Supplied with five pairs of cap screws: 3/8-16 x 3-1/2; 5/16-18 x 3-1/2; 5/16-24 x 3-1/2; M8-1.25 x 90mm; and 5/16-18 x 4 (SIR).
OTC DIVISION OF SPX CORP / Pt#: 7413
HEATER HOSE DISCONNECT TOOL AEROSTAR
Quickly and easily removes heater hose from heater core tube without damaging coupling retainer or hose.
OTC DIVISION OF SPX CORP / Pt#: 7448
AIR-OPER FUEL INJECTOR CLEANER USE W/FI TEST ADAPTER+SOLU
This cleaning device connects directly to your shop air supply and when used with recommended liquid solvent will clean injectors more effectively than aerosol methods. It works on many domestic and imported vehicles with either high or low pressure systems. The gauges large dial face is easy to read through the complete range of 0-100 PSI (0-7 bar).
OTC DIVISION OF SPX CORP / Pt#: 7494A
GEAR AXLE BEARING PULLER SET
Each of the pullers included in this set make short work removing semi-floating rear axle bearings. The 3 piece set services most domestic cars. Works with OTC puller-type slide hammers.
OTC DIVISION OF SPX CORP / Pt#: 7503
OUTER TIE ROD REMOVER
Works on imports and domestics; front or rear wheel drives; and cast or stamped steel steering knuckles. This one's a must when working on outer tie rods. Its versatility is a big time and money saver.
OTC DIVISION OF SPX CORP / Pt#: 7507
CV JOINT FORK TAURUS/SABLE USE WITH 5/8-18 SLIDE HAMM

OTC DIVISION OF SPX CORP / Pt#: 7575
FORD RADIO REMOVAL TOOL SET
Simply insert these tools into the holes on the radio face plate to release the retaining clips
OTC DIVISION OF SPX CORP / Pt#: 7588A
FORD 4WD CAST/CAMB SLEEV PULLR
Removes rusted and seized bushing before resetting the caster/camber and easily pulls most aftermarket and OE bushings on Ford 4WD vehicles. It's the only tool available that works on any angle OE bushing
OTC DIVISION OF SPX CORP / Pt#: 7602
GM PFI NOID LITE
Noid-Lites are the fastest
OTC DIVISION OF SPX CORP / Pt#: 7604
DELUX QUIK-DISCONNECT TOOL SET
OTC's handy disconnect tools all packaged together in one set. Nine separate tools for disconnecting fuel line transmission and AC connectors. Applications cover Ford GM and Chrysler.
OTC DIVISION OF SPX CORP / Pt#: 7635A
BASIC EFI DIAGNOSTIC KIT FUEL INJECTION PRESSURE TE
For quickly and accurately diagnosing fuel pressure problems on GM
OTC DIVISION OF SPX CORP / Pt#: 7639
W-CAR REAR CALIPER BUSHING KIT
This is the approved method of servicing seized four wheel disc brake rear caliper slides on GM W-body cars: the bushing driver (No. 49012) attaches to your air hammer to remove the frozen slide; the hone (No. 219387) cleans out the inside of the caliper slide bore; and the wire brush (No. 219386) cleans out the caliper's seal groove.
OTC DIVISION OF SPX CORP / Pt#: 7646A
FORD CLUTCH COUPLNG DISCONNECT 1988-UP F-SERIES/BRONCO-2/
• Disconnects the hydraulic clutch line from the clutch slave cylinder
OTC DIVISION OF SPX CORP / Pt#: 7659
FUEL INJECTION CLEANING KIT AIR-OPER CANISTER+ADAPTERS
Clogged fuel injectors can cause sluggish engine performance
OTC DIVISION OF SPX CORP / Pt#: 7665
GM TBI FUEL PRESSURE TEST ADAP
(16mm x 1.5). Wt. 5 oz.